DIY kit
100 ft
Limited-time offer · through December 1 2026, 11:59 p.m. Montréal time.
Choose 100 ftMake it your light.
Try the scenes across the page.
Colour
DIY kit · Permanent lighting
Your home. A new light.
A permanent lighting kit you can install yourself. Warm white for everyday evenings. Colour for the moments worth celebrating.
From $1,080 CAD + tax and shipping · 50% deposit
Limited-time offer · through December 1 2026, 11:59 p.m. Montréal time.
- 50% deposit
- Shipping calculated at checkout
- Support from Vision Bleu, Montreal
Payment received. Thank you.
Stripe confirms your payment. Your order is recorded.
- Ships within 30 days of your order.
- Before your kit ships, we email you an invoice for the other 50%.
- If you requested installation, our team contacts you with a project-specific quote.
You left checkout
Checkout was closed. Check your Stripe receipt before starting another order.
01 / One home. Many moods.
Light changes everything.
The same home, a different feeling. Explore three lighting scenes.
Lighting preview Made for everyday evenings.
A warm welcome that brings out the lines of your home, night after night.
02 / See the difference
See the light in motion.
From a close-up under the eaves to the whole home: explore the lighting in motion, then see the kit in two real installation clips.
The details make the difference.
See the light points under the soffits, the cable route and the colour effect in these two installation videos.
Explore the kitReal footage · No simulation
Warm white, up close
Light points fitted beneath the soffit, filmed up close in warm white.
Colour along the roofline
Coloured light points on the front of the home and the porch.
Explore the details Preparing the view… 1 Colour and warm white
Choose colours for special occasions, or warm white for everyday evenings.
2 An epoxy-filled interior
Turn the light to see its side profile and epoxy-filled interior.
3 Connected light points
The cable joins the light points. Plan the route and gaps between sections before installation.
4 Backed by 3M tape that holds
Every light point carries high-quality 3M adhesive tape on the back, covered by a red liner. The glue grips your soffit firmly in the cold and in the heat, with no drilling. Peel the liner, press the adhesive side against the soffit with the lens facing down, and follow the kit instructions.
03 / In the box
Your kit, up close.
The essential components, together for your project.
- RGBW LED light string, with warm white
- Controller and power supply
- Extension cables and connectors
- Adhesive pads behind the light points
Plan the lit sections, gaps and access to power. We can help you check the layout before ordering.
5-year warranty on the kit’s parts. Labour is not included, since you install the kit yourself. The warranty on systems installed by Vision Bleu does not apply to DIY kits. If Vision Bleu installs your kit, the 5-year parts warranty stays the same and our installation is covered by a 3-year labour warranty.
Control it from your phone
Patterns, effects, zones and schedules, all in the app.
Pick a pattern. 
Choose an effect. 
Light each part of the house on its own. 
Set when they turn on and off.
Specs
The kit’s technical details, from the manufacturer’s specification sheet.
Light points
- Colours
- RGBW, with colour and chasing effects
- Count
- 100 ft kit: 72 light points150 ft kit: 108 light points
- Voltage
- 36 V DC
- Power
- 100 ft kit: 108 W150 ft kit: 162 W
- Water resistance
- IP68
- Beam angle
- 108°
- Size
- Ø 40 mm × 17.5 mm high
Controller
- Outputs
- 4 channels
- Control
- App (cloud), Wi-Fi 2.4 GHz and Bluetooth
- Protection
- IP44: mount it under cover, sheltered from rain and snow
- Size
- 144 × 85 × 26.5 mm
- Operating temperature
- −40 °C to +50 °C
- Certification
- cULus-listed power supply
04 / Installation
Installation in three steps.
Plan the route, then make the light your own.
-
Plan and test
Measure the sections you want to light and identify the gaps. Lay out and test the components before fixing them in place.
-
Prepare and attach
Prepare the surface, then position the light points beneath the soffit. Follow your kit’s installation instructions for your chosen surface.
-
Connect and enjoy
Connect the system as instructed, then choose a first scene in the app. Start with a warm white and make it your own.
05 / Your home, your format
Follow the lines of your home.
Straight runs, corners, and gaps. Every detail matters when choosing your kit.
Add up the sections you want to light.
Example calculation: living room (A) + entrance (B) + garage (C). Use the measurements of your own home.
35 ft + 15 ft + 25 ft= 75 ftIllustrative example
Map your route.
Choose the lines you want to light. Mark your starting point near the power supply and every change in direction.
Measure each section.
Follow the full route, including peaks and side returns. Add your measurements, then note any extension needs separately.
Confirm your layout.
We can help you choose your kit and check your extension needs before you order.
Help me choose
DIY kit
150 ft
Limited-time offer · through December 1 2026, 11:59 p.m. Montréal time.
Choose 150 ftExample layout. Lengths and extension needs vary by home.
06 / Your order
Your kit. Your choice of payment.
Choose your format, then enter your address to calculate shipping. You can review the taxes and amount due before confirming on Stripe.
What do I pay today?
You pay 50% today. Before your kit ships, we email you an invoice for the other 50%. Tax applies to both payments, and shipping is calculated at checkout, where you review the amount due before confirming. You can also choose to pay everything at checkout.
Are shipping and taxes included?
No. Prices are in Canadian dollars, before tax. Shipping is extra: it is calculated at checkout from your delivery address. Taxes and shipping costs appear there before payment.
How do I choose a format?
Measure the sections you want to light, the gaps and the route to the power supply. If you are unsure, contact us with the measurements and a photo of your home. We will help you check the kit layout before ordering.
Can Vision Bleu install the kit?
You can request an installation quote. It usually ranges from $400–$600, depending on the project location and type of home. We confirm availability and the price with you before any commitment. Installation is billed separately.
When will my order ship?
Ships within 30 days of your order. If your kit has not shipped within 30 days of your order, you can cancel for a full refund.
Can I cancel or return my kit?
Yes. Before your kit ships, you can cancel for a full refund of everything you paid. If it has not shipped within 30 days of your order, you can also cancel for a full refund. After delivery, you can return the kit unused, in its box, within 14 days: you pay return shipping and we refund the kit price. A defective kit is replaced under warranty. The terms of sale have the details.
What warranty comes with the kit?
5-year warranty on the kit’s parts. Labour is not included, since you install the kit yourself. The warranty on systems installed by Vision Bleu does not apply to DIY kits. A defective kit is replaced under this warranty. If Vision Bleu installs your kit, the 5-year parts warranty stays the same and our installation is covered by a 3-year labour warranty.
Who do I contact for support?
You can reach Vision Bleu at (450) 999-7258 or contact@visionbleu.com. We can help with kit selection and installation questions.
Ready for your next evening?
Two formats. Order with a 50% deposit or pay in full. Tax and shipping extra.
Choose my kitPrefer to have us install it?
Four quick steps. We reply within one business day.
Got it. Thank you.
Someone from the Vision Bleu team will reach out within one business day to schedule your free visit.
- Step 1
- Step 2
- Step 3
- Step 4